Kitoki v2 - 5w Single Ended Stereo Amplifier
Built to order. 1-2 weeks typical build time.
Note: If you wish to customize your amplifier in any way or if you would like something completely custom, please e-mail me so we can discuss it!
5W, Class A Single Ended Stereo Amplifier
All our amplifiers are hand-made with great care and are point-to-point wired.
This amplifier is very minimalist and is made using only the best parts and great design, such as Teflon coupling caps and a stepped attenuator (built in-house) that comes standard with every Kitoki.
It's because of this that the Kitoki is so fast, natural and honest sounding.
Use it with your favorite high-sensitivity speakers with this amp!
Some more info on the design
This amp comes standard with a series-type stepped attenuator (made by us), which is leagues ahead of any potentiometer in terms of noise and accuracy.
The driver tube is a single, very linear 6N6P tube with active loading for maximized gain and linearity!
The output tube uses the EL84/6P15P-EV/6P14P-EV types with a constant current output stage for lowest distortion and consistent results over the lifetime of the tube.
Teflon capacitors are used to couple the driver to the output stages. These come standard with all Kitoki amplifiers. There are no upgrade options for this.
This amp also doesn't use any feedback loops, so the sound is very natural and open.
If you have any other questions, please send me an e-mail.
Kitoki [ ɡē- dō- ɡē]
In Blackfoot, this name means Prairie Chicken, a small and beautiful wild bird with a lot of personality, and this is a small amp, so I thought the name was fitting.
Made in Canada
All our products are designed and built in Canada, and the bulk of the components are sourced within North America.
This product comes with a 5 year warranty to the original owner for both parts and labor.
Tubes have a 90 day warranty.
If for some reason you are not satisfied with your product, you can return the item within 30 days for a full refund, minus shipping and a 10% restocking fee.
Power Output: 5 Watts RMS@8 ohms
Frequency Response: 30Hz-20kHz
Distortion: Less than 2% at full output
Feedback: None used
Inputs: 3 (RCA)
Input Impedance: 50K Ohms
Volume Control: Series-type stepped attenuator
Coupling Capacitor: NOS Teflon Film and Foil
Input Voltage: Just under 2V for maximum power output
Driver Tube: NOS 6N6P Included with amplifier
Output Tube: 2x NOS 6P15P-EV Included with amplifier
Power Usage: Less than 80 watts
Size: 320mm(W) x 220mm(L) x 80mm(H)
Weight: 7.8kg (18lbs)
Chassis Wood: Walnut
[+$250] 24-Step Ladder-Type Attenuator hand-made in house with Vishay RN military grade resistors. This also upgrades all resistors in this amplifier to the Vishay RN military type.
Ladder types are the best and most desirable type of stepped attenuator, with only a single resistor in series with the signal path at any time. Picture Below