Cart 0

Kitoki - Low Power S.E.T. Stereo Amplifier

STATUS: Built to order. Only (2) B-Stock Chassis available. This is discounted $100 from the original price.
NEW: If you wish to customize your amplifier in any way, please e-mail me so we can discuss it! 
Product Description
Class A Single Ended Triode (SET) Stereo Amplifier
All our amplifiers are hand-made with care and point-to-point wired.
This amplifier is very minimalist and is made using only the best parts and great design. It's because of this that the Kitoki is so fast, natural and honest sounding.
Use it with your favourite high-sensitivity speakers such as those by Omega Loudspeakers.
Power Supply
This amplifier used a single EZ81 tube for its power rectification.
All the capacitors used in the power supply are high quality film capacitors, which are faster and outperform even the very best electrolytic capacitors.
This also employs a large choke filter for even better performance and lower noise.
Driver and Output Stage
Both the driver and output stage are a constant current draw design and provide an easy load for the power supply which provide an easy and very linear load for the power stage.
This amp is designed for use with the excellent 6DJ8/6N1P-EV types, which utilizes one section for the voltage gain and the other section for drive to the output tube.
The output tube uses the EL84/6P15P-EV types with a constant current output stage for lowest distortion. NOTE: We recently upped the idle current on the output stage, resulting in 2W of output power instead of 1.5!
The output transformers used in this amplifier are ultra high fidelity and super wide frequency response. No compromises were made.
In Blackfoot, this name means Prairie Chicken, a small and beautiful wild bird with a lot of personality, and this is a small amp, so we thought the name was fitting.
Made in Canada
All our products are designed and built in Canada, and the bulk of the components are sourced within North America.
This product comes with a 5 year warranty to the original owner for both parts and labor.
Tubes have a 90 day warranty.
Satisfaction Guarantee
All units come with a 30 day in-home satisfaction guarantee so you can try our products in your own home with your equipment.
If for some reason you are not satisfied with your product, you can return the item within 30 days for a full refund, minus shipping and a 10% restocking fee.
Power Output: 2 Watts RMS. Includes Output taps to 4 and 8 ohm speakers.
Frequency Response: 20Hz-100kHz, +/-1dB
Distortion: Less than 2% at full output
Feedback: None used
Input Impedance: 50K Ohms
Volume Control: Alps Blue Velvet Potentiometer (attenuator upgrade optional)
Input Voltage: Just under 2V for maximum power output
Driver Tube: NOS 6N1P-EV Included with amplifier
Output Tube: NOS 6P15P-EV Included with amplifier
Rectifier Tube: EZ81 Included with amplifier
Power Usage: Less than 80 watts
Size: 320mm(W) x 220mm(L) x 80mm(H)
Weight: 7.8kg (18lbs)
[+$175] Teflon Film and Foil Capacitors.
This is a big upgrade over the standard film and foil coupling capacitors that come with the Kitoki.
[+$100] Upgrade your driver stage from the original 6DJ8/6N1P to the EL84/6P15P-EV power tube.
It adds somer more punch and slam over the more mellow 6DJ8 driver design!
[+$250] 24-Step Ladder-Type Attenuator hand-made in house with military grade resistors.
Ladder types are the best and most desirable type of stepped attenuator, with only a single resistor in series with the signal path at any time. Picture Below